焊接词.docVIP

焊接词汇? 直接看~ 凹槽对接焊缝groove butt joints?百分表Centimeter?百分表检定仪Dialgage calibrater?百分尺Dialgauge?板单元plate unit?板块blocks?板块组焊Assembly and welding of blocks?半自动切割机Semi-auto cutter?包装Packing?刨边机Edge planer?边跨side bay?边跨尾索区side bay and tail chain area?标记Marking?不合格品控制程序Unqualified control program?补偿量complexity?布氏硬度计Breinell tester?蔡司大型卧式金相显微镜Horizontal metallurgical microscope?超声波探伤检查ultrasonic examination?超声波探伤仪Ultrasonic defect detector?侧面拉板side pulling plate (SPP)?测厚仪Gauge meter?插板spile?承压板 load bearing plate (ELBP)?承压板loaded plate?尺寸偏差variation of machining size?冲击impact?冲击韧性impact toughness?冲击试验机Impact tester?出胎Off-jig?船位焊接胎ship position welding jig?锤击hammering?醇溶性无机硅酸锌车间底漆Hemple’s shop primer?磁粉探伤magnetic powder inspection?磁粉探伤仪Magnetic defect detector?磁力吊magnetic crane?错开距离displacement distance?搭接overlap?打底焊缝priming weld seam ?大块件large pieces?带锯切割机Band saw cutter?待焊零部件parts to be welded?单臂油压机Single arm oil press?单元件组焊Assembly and welding of unit element?底板bottom plate?底漆base paint?垫板shim plate?电光双盘分析天平Electrooptic double tray analyzing balance ?电弧螺柱焊arc stud welding?吊耳lifting lug?吊装单元hoisting unit?顶板top plate?定位焊Positioned welding?端部承压板end load bearing plate (ELBP)?断弧the current should not be interrupted?堆放stacking?多用途切割机Multi-purpose cutter?硅整流焊机Digital controlled cutter?对焊butt weld?对接butt joint?对接接头butt welding joint?对接焊缝butt-jointed seam?发射光谱分析仪(真空型) Emission spectrographic analyzer?返工Remake?反口excessive penetration?反极性连接reversed polarity?防撞护栏anti-collision guardrails?放样lofting?飞溅物splash?分光光度计Spectrophotometer?封头板end sealing plate?风嘴wind guides?浮吊floating crane?浮锈rust?辅助跨auxiliary bay,?腹板web?杆件rod piece?赶平Flattening?赶板机flatter?赶平机 flattener?钢板赶平机 plate flattener?钢墩steel piers?钢筋混凝土快reinforced concrete lump?钢筋锚固钢板steel anchoring plate?钢卷尺标准装置Steel tape standard device?钢锚箱steel anchor box?钢锚箱节段sections?钢支礅steel pier?高精度洛氏硬度计High-precision Rockwell hardometer?隔板diaphragm?工单号job numbe