碳纳米管和碳化硅对铜混合纳米复合材料显微组织和干滑动磨损行为的影响.pdfVIP

Trans. Nonferrous Met. Soc. China 26(2016) 3170−3182 Effect of carbon nanotube and silicon carbide on microstructure and dry sliding wear behavior of copper hybrid nanocomposites 1,2 3 4 5 6 H. M. MALLIKARJUNA , C. S. RAMESH , P. G. KOPPAD , R. KESHAVAMURTHY , K. T. KASHYAP 1. Advanced Composites Research Centre, P E S Institute of Technology, Bangalore 560085, India; 2. Department of Mechanical Engineering, Government Engineering College, K.R. Pet 571426, India; 3. Department of Mechanical Engineering, Alliance College of Engineering Design, Alliance University, Anekal, Bangalore 562106, India; 4. Department of Mechanical Engineering, CMR Institute of Technology, Bangalore 560037, India; 5. Department of Mechanical Engineering, DayanandaSagar College of Engineering, Bangalore 56078, India; 6. Department of Mechanical Engineering, School of Engineering and Technology, Jain University, Bangalore, India Received 2 November 2015; accepted 24 February 2016 Abstract: Microstructure and tribological properties of copper-based hybrid nanocomposites reinforced with copper coated multiwalled carbon nanotubes (MWCNTs) and silicon carbide (SiC) were studied. Carbon nanotube was varied from 1% to 4% with silicon carbide content being fixed at 4%. The synthesis of copper hybrid nanocomposites involves ball milling, cold pressing and sintering followed by hot pressing. The developed hybrid nanocomposites were subjected to density, grain size, and hardness tests. The tribological performances of the nanocomposites were assessed by carrying out dry sliding wear tests using pin-