基于ANSYS43开关磁阻电机优化设计与系统构建详解.PDFVIP

基于ANSYS 43 开关磁阻电机优化设计与系统构建 [姚叔春] [浙江大学电气学院，310058] [ 摘 要 ] 开关磁阻电机（Switched Reluctance Motor ）具有结构简单、成本低、可靠性高、调速范围大 的优点，相比于传统电机，开关磁阻电机可调参数多，但易出现转矩脉动大、噪声和振动的问 题。4/3 开关磁阻电机是一种结构较为新颖的磁阻电机，但对其的仿真和设计研究并深入。运 用Ansys 的各种工具包，建立4/3SRM 电机由设计到控制系统完整仿真模型，对电机转矩和 振动进行分析。首先简要介绍4/3 开关磁阻电机的结构和运行原理。其次基于CAD 到maxwell 的脚本，构建不同转子结构电机模型，探讨转子结构参数对转矩的影响。其次基于maxwell 的参数化仿真，优化电机的控制角。在此基础上，建立Simplorer 与Maxwell 的联合仿真模型， 模拟电机的空载运行。然后，基于Ansys/Workbench 对电机的定子进行振动模态分析。最后， 制作电机并构建基于Psoc 芯片的实验平台，进行空载测试进行验证。 [ 关键词 ] 开关磁阻，Ansys, 联合仿真，参数化，模态分析 Optimization design and system construction of 4 /3Switched Reluctance Motor Based on ANSYS [Shuchun Yao] [Electrical Engineering，Zhejiang University，310058] [ Abstract ] SRM (switched reluctance motor) has advantages of simple structure, low cost, high reliability and large speed range. Compared to traditional motor, SRMs have more adjustable parameters, but prone to large torque ripple, noise and vibration problems. 4/3 SRM is a new type of reluctance motor, but its simulation and design need to be studied. By using various tools of Ansys, the complete simulation model of 4/3 SRM is set up from the design to the control system, and the motor torque and vibration are analyzed. Firstly, the structure and operation principle of 4/3 switched reluctance motor are briefly introduced. Secondly, based on the CAD to Maxwell script, the motor model of different rotor structure is built, and the influence of rotor structure parameters on torque is discussed. Then, based on the Maxwell simulation, the control angle of the motor is optimized. On this basis, the establishment of a combined sim