霍尔电流传感器的应用 毕业论文外文翻译.docxVIP

英文文献Application of Hall Current Sensor1. IntroductionWith the expansion of urban population and the scale of construction, all electrical equipment increases, consumption increases, the city often overload the power supply equipment, power has become increasingly harsh environment, the power of the test more and more serious. According to statistics, everyday, electrical equipment have been about 120 times the power problems of various intrusive, 60% of electronic equipment from power failure. Therefore, the growing importance of power issues prominent. Originally as a supporting role, more power with less capital investment by manufacturers and researchers, the attention, power technology thus become a new technology.Today, small power equipment has been integrated more and more new technologies. For example, switching power supply, hard switching, soft switching, parameter regulation, linear feedback regulator, magnetic amplifier technology, numerical control pressure regulator, PWM, SPWM, electromagnetic compatibility, etc.. Direct promotion of the actual needs of the power technology continues to develop and progress, to automatically detect and display the current, and over current, over voltage and other hazards happens with automatic protection and more advanced intelligent control with sensor detection, sensor sampling, Sensing a growing tendency to protect the power supply technology to detect current or voltage sensors have come into being and by the majority of power in China began designers of all ages.2. The current sensor principle of workCurrent sensor can measure all types of current, from DC to tens of kHz AC, its working principle is mainly based on Hall-effect principle. (This article is mostly below zero flux principle of closed-loop product example)When the primary conductor through the current sensor, the primary current IP will produce magnetic field lines, the primary focus in the core air gap magnetic field lines around the air gap built int