3512B发动机故障代码(国外英文资料).docVIP

3512B发动机故障代码(国外英文资料) 3512B engine failure code The troubleshooting code is a reminder to the operator that the troubleshooting code includes the following: 1) MID = module recognition 2) CID = component recognition 3) FMI = fault state recognition The electronic control template (ECM) MID code is 036, and the troubleshooting code can be from the catebil electron Maintenance tools (ET) observe. 1) recent troubleshooting code and failure events: The module will issue an alert, which must be processed in time to start the engine. 2) stalled troubleshooting code and failure events: Electronic control module (ECM) store code to fault diagnosis and fault events including the fault for the first time, and the recent time and the number of times, these data will be automatically removed if within 100 hours dont have the same failure happen again. 3) failure status recognition (FMI) FMI (00) indicates that the data is too high FMI (01) indicates that the data is too low FMI (02) indicates a signal error FMI (03) indicates overvoltage FMI (04) indicates a low voltage FMI (05) indicates low current FMI (06) indicates that the current is too high FMI (08) indicates abnormal signals FMI (09) indicates an update error FMI (12) indicates assembly or component failure The FMI (13) instructs the component to be corrected MID 036 - CID 0001 - FMI 06 - FMI: first cylinder nozzle electromagnetic valve short-circuit processing: check the first cylinder nozzle solenoid valve MID 0336 - CID 0001 - FMI 05 first cylinder nozzle solenoid valve disconnection: check the first cylinder nozzle solenoid valve Mid-036 - CID 0002 - FMI 05 second cylinder nozzle solenoid valve disconnection: check the second cylinder nozzle solenoid valve MID 036 - CID 0002 - FMI 06, oil nozzle solenoid short circuit processing: check the second cylinder nozzle solenoid valve MID 0336 - CID 0003-fmi 05 - FMI 05 blowout nozzle solenoid valve disconnection: check the third cylinder nozzle solenoid valve MID 0336 - CID