不同应变速率时混凝土损伤的过程特性分析 - 水利水运工程学报.docVIP

不同应变速率时混凝土损伤的过程特性分析 - 水利水运工程学报.doc

  1. 1、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。。
  2. 2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  3. 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
  4. 4、该文档为VIP文档,如果想要下载,成为VIP会员后,下载免费。
  5. 5、成为VIP后,下载本文档将扣除1次下载权益。下载后,不支持退款、换文档。如有疑问请联系我们
  6. 6、成为VIP后,您将拥有八大权益,权益包括:VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
  7. 7、VIP文档为合作方或网友上传,每下载1次, 网站将根据用户上传文档的质量评分、类型等,对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
不同应变速率时混凝土损伤的过程特性分析 - 水利水运工程学报

不同加载速率下混凝土损伤阶段划分的 试验研究 (1.三峡大学土木与建筑学院, 湖北 宜昌 443002; 2.十堰市建筑设计研究院,湖北 十堰 443000) 摘 要:在不同加载速率(10-5/s、10-4/s、10-3/s、10-2/s)试块Weibull模型构建了损伤变量,并应变空间下对损伤曲线的细化研究曲线的特点合理确定损伤界点曲线上的,界点损伤曲线划分为阶段,探讨速率对1)第一损伤界点速率的敏感,速率的增大几乎线性发展,第二损伤界点速率的)速率的使三个损伤阶段的区间长度分配,对前两阶段影响较大,对第三个损伤阶段长度的影响较小)界点基本对称两侧,大部分的损伤集中在峰值应的峰值应变范围且界点应水平的比值5,随速率的提高而减小 关键词:混凝土;加载速率;;阶段 TU502+.6 文献标识码:A Experimental study of the damage stage division of concrete under different loading rates MA Xiao-liang1 , PENG Gang1 , XIAO Jie 1, HU Wei-hua1,2 (1.College of Civil Engineering Architecture, Three Gorges University, Yichang Hubei 443002, China; 2. Shiyan Architectural Design Institute, Shiyan Hubei, 443000 ,China;) Abstract: Based on the different loading rate (10-5/s,10-4/s,10-3/s,10-2/s) under the uniaxial compression test, the Weibull model based on the improved constructed the damage variable, and the damage under the strain space curve for further detailed research. According to the characteristics of the damage curve, the establishment of reasonable method to determine the location of the damage point on the curve, and then through the two damage point will the curve is divided into three stages. On this basis, the influence of the damage point and the length of the stages under different loading rate were discussed .The results show that: (1) The first damage point is more sensitive to the increase of loading rate, and increases the loading rate is almost linear development process, the second damage point is not sensitive to the increase of loading rate.(2) The influence of loading rate make the three stages of damage the redistribution length and had a greater influence on the first two stage, less effect on the injury of the third stage.(3) Two damage point position basic symmetric peak strain distribution in the two side, most of the damage is focused on the peak stress about twice as large as the peak strain of the range, and the ratio of two point to damage location stress level in the vicinity

您可能关注的文档

文档评论(0)

zhaoxiaoj + 关注
实名认证
文档贡献者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档