《煤矿安全监控十万个为什么》(国外英文资料).docVIP

《煤矿安全监控十万个为什么》(国外英文资料) Why do mines have to be equipped with safety monitoring systems? A: mine safety monitoring system can be real-time monitoring of underground gas concentration, in case of gas overrun can cut off the charged area power supply, prevent the occurrence of gas accident; In addition, the mine safety monitoring system can monitor the changes of the parameters such as mine gas and other parameters on the ground, provide the basis for safety management, and safeguard mine safety production. So mines must be equipped with a safety monitoring system. Why should coal mining enterprises establish a system of measuring and measuring safety meters? Answer: in order to improve coal mine safety monitoring equipment accuracy, reliability, and avoid the defects of measuring instruments, measuring means, make the equipment cant display normal utility, the coal mining enterprises shall establish safety instrument measurement inspection system. Why does the security monitoring device have to use a dedicated cable connection? Answer: if the monitoring signal cable and the dispatcher telephone share cable, its essence is safe and explosion-proof performance is not guaranteed. When the cable fails, the monitoring equipment and the dispatcher phone are unable to work properly and can not understand the gas concentration in the underground. The safety monitoring equipment is safe and reliable only using a special cable connection. Why should safety monitoring devices be given priority over the essential security? Answer: the intrinsically safe explosion-proof electrical equipment whether working in normal and fault condition, edm and thermal effect produced by explosive mixture are not lit surroundings; Therefore, the safety monitoring equipment should be given priority to the essential security. Why does the ground security monitoring center implement 24-hour watch system? A: it is only in the ground security monitoring station that the 24-hour watch system can be moni