几份余热发电考试题(国外英文资料).docVIP

几份余热发电考试题(国外英文资料) The waste heat generation general operation procedure Name: score: Fill in the blanks (15 points) During the warm-up, the condenser vacuum was maintained at 0.05 ~ 0.07 MPa (absolute) (375 ~ 525mmHg). 2, warm pipe is mother refers to the main steam pipe to electric isolation valves in front of the main steam pipe of warm tube, from the isolation valve to the main valve to steam chamber between the main steam pipeline of warm warm tube and after starting the steam turbine machine simultaneously. 3, when bearing imported oil temperature higher than 40 ~ 45 ℃, the cold oil machine running, keep the cold oil export oil temperature at 35 ~ 45 ℃. In addition to the special need, the steam turbine shall not run for long periods of time, and the generator shall be equal to the electrical load of 10%. Empty load, when running after the cylinder temperature should not exceed 100 ~ 120 ℃, should not be more than 60 ~ 70 ℃ after loading. 5, when the normal operation of the steam turbine bearing oil inlet temperature should be kept within the scope of the 35 ~ 45 ℃, temperature rise is generally not more than 10 ~ 15 ℃; The lubricating oil pressure should be kept within 0.08 ~ 0.12 MPa (table). 6, generator parts temperature regulation: the maximum permissible stator coil temperature is 105 ℃; The allowable temperature of the stator core is 100 ℃; The maximum permissible rotor winding temperature is 130 ℃. The lubricating oil pressure drops to 0.055 Mpa when the alarm, 0.04 Mpa low pressure electric oil pump self-casting, 0.03 Mpa stop, 0.015 Mpa. 8, intermediate tank storage and buffering role in the system, balance water and water, guarantee system and stable operation, operation after a period of time, the middle water tank will be scaling because of deposit, should drainage and cleaning on a regular basis. The steam turbine auxiliary system consists of condensing system, regenerative system, hydrophobic system and steam sealing system. The power of the wate