发电厂升压站的保护(国外英文资料).docVIP

发电厂升压站的保护(国外英文资料) What is the protection of the stations booster station, the detailed answer, and the design of the power stations booster station to protect the configuration... Online and so on!!! v What protection should be installed? What do they do? The following protection shall be based on the capacity of the generator according to the capacity of the generator. 1, longitudinal differential protection: the short circuit protection for the stator winding and its lead. Cross-link differential protection: a short circuit protection for the stator winding. This kind of protection is only installed when a phase stator winding has two or more parallel branches that form two or three neutral points. Single-phase ground protection: a single phase ground protection for generator stator winding. The excitation circuit ground protection: to protect the ground fault of the excitation circuit. 5, low excitation, excitation-loss protection: to prevent large low excitation generator (excitation current is lower than the static stability limit of the excitation current) or losing excitation (excitation current is zero), from the system to absorb a large number of reactive power and harmful to the system, the capacity of 100 mw and above generators are installed the protection. Overload protection: the time of the captains time exceeds the rated load. Small and medium generators only have stator overload protection; The large generator shall have the load and excitation winding under load protection respectively. 7, stator winding over current protection: when the generator differential protection outside the scope of short circuit, and the protection of the short circuit components or circuit breaker refused to action, this kind of protection as an external short-circuit backup, backup protection as a differential protection. 8 stator winding, over voltage protection: to prevent sudden to full load shedding caused by the excess voltage of stator winding hydro-generator and