变电所屏蔽措施(国外英文资料).docVIP

变电所屏蔽措施(国外英文资料) People gauge 4.9.6 when distribution substation with up, down or adjacent residential, office room only one floor or wall apart, distribution substation should take measures such as shielding, noise reduction. The design of civil buildings is 50352-2005 The substation of a civil building shall meet the following requirements: 5) when the transformer substation is directly above and directly below the area of residential, guest room, office and so on, the substation should be screened. Blocking of substation (take one) : To lay steel nets in the wall and in the floor of the earth, or to the ceiling of the substation (0.5 mm thick), and connect to the grounding device. Brush shield paint (also called conductive paint). Coating mainly has: silver conductive lacquer, silver copper conduction lacquer and nickel conductive paint, after brush block coating, for rf interference can reduce 40 ~ 80db. The price of conductive lacquer is a little expensive, about 400 yuan per square meter. The wall, the ground floor is laid steel wire mesh Paint (conductive paint) : silver conductive paint, silver copper conductive paint, nickel conductive paint Sheet iron -- no The case of the electromagnetic screen solution Application of conductive paint EMC, an acronym for Electromagnetic Compatibility, refers to an electronic device that does not interfere with other devices and is not affected by other devices. Electromagnetic compatibility is one of the most important indicators of product quality as well as the safety we are familiar with. Safety involves personal and property, while electromagnetic compatibility involves personal and environmental protection. Electromagnetic waves are associated with electronic components, which are known as EMI. For example, the snowflakes that are common on TV screens indicate that the receiving signal is disturbed. Shielding is between two space area for the isolation of the metal, to control the electric field, magnetic field and e