启动+ 系统安装+ 软件工具多用途U盘PE启动盘的制作和使用(国外英文资料).doc

启动+ 系统安装+ 软件工具多用途U盘PE启动盘的制作和使用(国外英文资料) Start + system installation + software tool multi-purpose U disk PE starter disc for production and use Recently, I created a multipurpose USB drive with a software tool called usb-hdd (BBSs usb-hdd startup guide V1.1). The usb stick is Kingston, with a capacity of 4GB and a real capacity of 3.72 GB. Placed inside the depth technology quickly installed pro V9.2, rain forest wind edition YN9.6 installation, dragon V7.5 empire technology , Shanghai.. computer city pure ver: 0811 , computer companys ultra-fast installer V10.0 and other five WINXP - SP3GHOST images. There are also several tools that are commonly used. Can replace the five one GHOST system cd-rom installation operating system, install the application software. I feel good about myself. The special contribution is Shared by netizens. Characteristic point Make it simple. The following description looks very verbose, and the actual operation is simple, just a few. Use convenience. When the system is installed, the usb stick is set up to operate directly under the microsystem. Update fast. You can delete the WINSP3GHOST image file and software tool from the usb flash disk at any time, and replace it with your favorite new version and the required tool software. Method: First, prepare for work Production tools: the USB_HDD startup wizard v1.1 (faith technology BBS). You do not need to install, download and decompress can be used. Usb drive: unlimited capacity. Because each image file is in the 700MB, the capacity is large enough and the capacity is small. For example, 512MB can only be used as a usb boot disk, unable to load the WINSP3GHOST image file; You can put one in 1GB, two in 2GB and five in 4GB. Winxpsp3-ghost image file: extract from the CD or the downloaded iso archive. Just open the CD file and duplicate the winxpsp3.ghost image file in it. Because each version of the mirror file name is mostly winxpsp3.ghost, So, if you make N, you have to make a little chan