机械设计课程设计说明书(国外英文资料).docVIP

机械设计课程设计说明书(国外英文资料) Xiamen senior technical school In the second semester of the 2008-2009 school year, hydraulic and pneumatic drive review rolls Class names A, fills up the topic The pressure in the hydraulic system depends on () the speed of the execution of the element depends on (). 2. The hydraulic transmission is the use of energy () () () and () a form of transmission. 3. Hydraulic transmission device consists of (), (), () and () of four parts, including () and () for the energy conversion device. 4. Hydraulic system, for some reason the system or a sharp rise in the local pressure transient in the system, the peak value of pressure phenomenon called (). 5. The essential condition of hydraulic pump work is: should have can change alternately (), should be flow equipment, oil absorption process, the fuel tank must be interlinked with (). 6. () the change of the hydraulic pump is depended on to carry on working, so also known as the hydraulic pump for pump (). 7. The hydraulic cylinder is convert () to () the energy conversion device, generally used to implement the (). In hydraulic transmission, the piston (or hydraulic cylinder) moves at the same speed as the piston (or hydraulic cylinder). ) it has to do with the flow of the fluid into the hydraulic cylinder, which is not related to the pressure of the oil. The number of positions in the valve slide valve is called (), and the number of oil that is connected to the oil circuit in the hydraulic system is called (). Blade pumps are usually divided into two types: () and (). 11. External gear pump is located in the side of gradually throw out of gear tooth is () cavity, the tooth gradually into the side of the mesh is () cavity. 12. The function of the hydraulic control valve is used to control and adjustment of the oil (), () and (). 13. The directional control valve is by changing the () and (), the relative position between to control (), on or off (), so as to change the direction of the working state of