电 气 符 号 含 义(国外英文资料).docVIP

电 气 符 号 含 义(国外英文资料) The electric-gas sign contains meaning (national institute of standards) If the first contact with the foreign party to provide the drawings, you may be a variety of drawings and element Numbers do, actually the number is a standard, both TOSHIBA and GEs design drawings, the same components, the number is the same, such as 87 is on behalf of the differential relay, 51 overcurrent relay is representative. These Numbers actually follow the IEEE Std c37.2-1996 standard, which is used in various wiring diagrams, manuals, and manuals. With the table on the right, you can easily find the components and functions represented by each number, making it easy for you to be a master reader! 1 - the master element The main component is the control switch and other elements. It directly or indirectly through protective relays, delayed relays, etc., to allow the equipment to be put into or out of operation. Note: this number is usually used for manual operation. If an electric or machine element has no other function number, it can also be used. 2 -- time delay starting or closing relay The delay starting or closing relay is the function of providing the desired delay at any time before or after the operation of the relay system. The functions no. 48,62,79 and 82 are not defined. 3 -- checking or interlocking relay Check relay or interlock, in the device, which reflect the working position of other components or some element of predetermined conditions, can be used to determine whether a work program to continue, or stop or for some elements of work position and check some predetermined conditions. 4 - master contactor The main contactor is a component that is controlled by element 1 and its corresponding components, intermediate relays, and protective components. The work is on or off the necessary control circuit, in order to keep equipment in operation under prescribed conditions, or in other terms and conditions, to run out. 5 - stopping device The stop ele