电控发动机故障排除(国外英文资料).docVIP

电控发动机故障排除(国外英文资料)To discuss the diagnosis and exclusion of auto electric control engine starting faultAbstract: in this paper, the failure analysis of the unstarter of the car electric control engine is analyzed, and the method of fault diagnosis and exclusion is pointed out.Key words: electric control engine; Fault; Diagnosis; To rule out0 the introductionWith the development of the electronic control fuel injection technology and maintenance level unceasing enhancement, the modern car on cars with electronically controlled fuel injection engine maintenance, using fault diagnosis of engine electronic control unit (ECU) for testing, and according to the fault code for maintenance of ECU storage, most can determine the cause and the location of a fault may occur, can bring great convenience to maintenance personnel work.Using data flow for the diagnosis of electronically controlled engine failure, the first thing to lay a theoretical foundation, with the theoretical basis, to identify problems is to find fault with the main root cause analysis; Then you have to understand the performance of the sensor data. Combined with the maintenance instances in the actual maintenance work, this paper discussed the experience of using data flow to diagnose fault diagnosis of electronic control system.The static data flow analysis failsStatic data flow refers to the data of engine electric control system that is read by the fault diagnosis device when the ignition switch is switched on and the engine is not starting. For example, static data for the intake pressure sensor should be close to standard atmospheric pressure (100-102kpa); The cooling liquid temperature sensor should be close to the ambient temperature when it is cooled. Heres an example of a diagnosis using a static data stream : the failure phenomenon: a jeda king car, which cant be started one morning after winter. Interrogation checking and judging: first of all, the owner: a few days before the morning starting is