疏水阀百科(国外英文资料).docVIP

疏水阀百科(国外英文资料) Hydrophobic valve encyclopedia. TXT Steam trap The steam trap is used for steam pipe network and equipment, which automatically discharge condensate, air and other non-condensing gas and prevent water vapor leakage. According to the principle of steam trap, steam trap can be reduced to three types: Mechanical type: depending on the change of the liquid level of the condensation water in the steam trap, including: Floating ball: a closed hollow sphere Open up float type: float to open up barrel type Open down float type: float to open down barrel type Thermostatic: changes in liquid temperature, including: Double metal plate: sensitive original is bimetallic strip Steam pressure type: the sensitive original is a corrugated tube or ink box, filled with volatile liquid Thermodynamic type: changes in the properties of the thermal dynamics of the liquid. Disc type: because of the same pressure, the fluid is different from the flow rate of the gas, and the resulting movement, static pressure, drives the disc valve action Impulse type: due to the different temperature of the condensate by polar string orifice plate, sitting between the throttling orifice plate between the different pressure of form, the driven disc movement. There are more manufacturers of steam traps in the country, and the connection sizes are not uniform. There are several major categories: (1) a generic class based on the JB/t2203-1999 hydrophobic valve structure length. At present, most water trap manufacturers in China are designed and produced by this standard. Such as Shanghai lai le valve co., LTD., shandong Shanghai engineering valve co., LTD., zhejiang Louvre boiler accessories factory, hangzhou valve factory, valve factory in wujiang, jiangsu province, Shanghai valve factory and high pressure valve factory in kaifeng, haian valve factory, etc. However, the standard is not perfect, the specification is not complete, the micro rev type safety valve is the maximum nominal size D NI 0