锂聚合物电池使用注意事项(国外英文资料).docVIP

锂聚合物电池使用注意事项(国外英文资料) First, the operation of the core operation considerations Because the core belongs to the soft packaging, to ensure the performance of the core is not damaged, it must be carefully operated on the core. Aluminum foil packaging materials The foil packaging material is easily pierced by sharp parts, such as nickel and needle. It is forbidden to hit the battery with sharp parts Clean the working environment and avoid the presence of sharp parts The use of nails and other devices is prohibited The battery and metal objects, such as necklaces and hairpins, are forbidden to be transported or stored 2. The top edge The top edge is very vulnerable Bend the edge of the ceiling 3. The hem The hem was completed in the battery production process and passed the sealing test. Do not open or damage the hem The poles mechanical strength is not exceptionally strong, especially aluminum. Its forbidden to bend the ears Mechanical impact 5. It is forbidden to fall, hit and bend the core No hammering or stampedes are prohibited No tapping or throwing of batteries. 6. A short circuit No short circuit core can be stopped at any time. It will cause serious damage to the core It is forbidden to short-circuit the battery with metal objects such as electrical wires Two, polymer lithium-ion battery test standard environment Ambient temperature: 20 + / - 5 ℃ Relative humidity: 45 to 85% Before testing, the battery should be finished Attention of polymer lithium ion charge and discharge 1. The charge Charging current and charging voltage shall not exceed the following criteria, such as more than a specified value may be in the charge and discharge properties, mechanical properties and safety of batteries caused damage, and could lead to a fever and leakage. The battery charger must be constant and constant voltage charge. A single battery charging current must be below 1C5A. Charging temperature range in 0 ~ + 45 ℃; The voltage cannot exceed 4.23 V when charged. 2. The disc