集热器联集管(国外英文资料).docVIP

集热器联集管(国外英文资料) The basic structure of a vacuum tube The vacuum tube is like a stretched hot water bottle. Inner glass tube 2. Selective absorption coating 3. External glass tube The inhalation membrane 6. Inhalant 7. Vacuum 1, inside the glass tube, and the cover glass tube vacuum interlayer, its inner wall to accommodate for thermal conductivity of the medium, outside wall attachment selective absorbing coating, and the selective absorption coating absorbed heat transfer medium to the hold. Selective absorption coating: this coating is composed mainly of three parts, from the outside to the inside, in order to reduce the reverse layer, absorption layer, bottom metal layer. The anti-retro-layer mainly ACTS as a membrane and protective membrane. Absorption layer mainly serves to absorb light energy; The metal layer mainly ACTS as a reflection, and the heat reflected from the internal medium is reflected back. Cover glass pipe: vacuum lining with inner glass tube, transmitting light from exterior to vacuum tube, and protect the interior from damage. Card: the free end of the glass tube in the fixed inner tube, reducing the damage caused by the relative displacement caused by the vibration between the inside and outside glass tubes; Fix the inhalant to ensure that the inhaler is properly positioned after the inhalation film is baked. Inhalation film: a vacuum that absorbs the residual or infiltration of the vacuum lining and maintains a vacuum. At the same time, the size and presence of the inhalation film can also be tested for vacuum tube and vacuum. Inhalant: the circular boat that holds the inhalant, protects the inhalant and makes it not affected before the baking. Vacuum layer: as few molecules as possible, reduce the heat loss caused by the convection of the vacuum tube. Vacuum tube vacuum can be reached at 510-4 (vacuum level 10-2). Two, three high pipe characteristic The solar core vacuum tube refers to the general term of high temperature special tube, high e