驾照考试规则(国外英文资料).docVIP

驾照考试规则(国外英文资料) Reverse piling technique 1) suggest B2 drivers license test participants, pour pole shift in lorries subject two libraries to prepare before the exam, look around the vehicle, ensure the parallel to the line of vehicle, reincarnation is before that is to say, and have a look at the steering wheel and the left front wheel position is reasonable. When the left bank is in reverse, the clutch is slowly lifted up to the half, and the clutch will be held steady after it is started, adjust the speed and slow backward. Look back to the right and back to the right backdoor triangle. When the cue reaches the window of the triangle, it will shoot right to the right. If observed the rear right may tie rod, quickly back to the left a big direction, just a moment, will the rear of the tie rod, continue to shot to the right direction. The rear smoothly into the library, two lorries subject move down rod library skills prompt through the left mirror to observe left body line parallel to the library on the left line, quickly direction back is to the left. After being car smoothly into the library, watch back left the mirror body to adjust the direction parallel to the side, the wide, to the left, narrow, the right two lorries subject to pour pole shift library skills advice can also look back a car rear window center marks and after two pole center whether to is, if right, left, left, right. Keep your direction after you finish, stop after you arrive at the stop sign. Reverse the right side of the car, and then, when the three and the four are not overlapping, the direction is fast to the left. Close to the cue, when left to the rear of the possible tie rod, quickly back to the right a big direction, just a moment, estimate would not touch the lever, continue to killed the direction to the left. When the cars tail runs smoothly into the library, the left body line will be turned right back to the right when the left body line is parallel to the left line of the librar