高频复习200806(国外英文资料).docVIP

高频复习200806(国外英文资料) Hf electronic circuit problem A, fills up the topic The communication system is the source, the input converter, the output converter, the sending device and the receiving device And the channel. The function of an input converter is to transform the information input into an electrical signal. The function of the sending device is to process the base band signal and send it to the channel with sufficient power to make the signal valid Transmission, the main processing is modulation, the output signal of the sending device is the tuned signal. The function of the receiving device is to remove the modulated signal sent by the channel and process it, and the corresponding basis for the terminal phase is obtained With the signal. The effect of the output converter is to restore the baseband signal to its original form. The channel is the channel of signal transmission, which is divided into two broad categories: wireless channel and wired channel. wireless Channels include the earths surface, underground, underwater, earths atmosphere and space. The cable channel consists of overhead light and coaxial electricity Cable and cable. There are many kinds of communication systems, which can be divided into wired channels and wireless channels according to the channels used. The transmitted baseband signals can be classified into analog communication systems and digital communication systems. The frequency range of the VHF band is 30 to 300 MHZ, with a wavelength of 10 to 1m, and the main mode of transmission is spread through space. 9. There are three kinds of mode of transmission: radio waves propagation along the surface of the ground wave, ionospheric refraction and reflection sky wave propagation, and the wave propagation along the space linear space. 10. If only consider loss resistance r, L, LC resonance resistance Rp for parallel resonant circuit, resonance frequency f0, unloaded quality factor Q0, passband BW0.7 for. A comprehensive measurement of