毕业设计（论文）-用PLC编程的低层电梯控制系统设计.docVIP

毕 业 设 计 题 目： 基于PLC和MCGS的电梯控制系统的设计 学院： 电气信息学院 专业： 测控技术与仪器 班级： 130 学号： 学生姓名： 导师姓名： 唐 完成日期： 2017年6月 Summary The text descrribes a control system that is dased on PLC .The elevator is perpendicular directional of the coneyance equipments be indispensable in the high building of transportation equipents.It depends electric power， dragging along to move a car that can carry person and lesd a track in the building of the well way up do perpendicularity to ascend and descend sport， there is prominent function in the people＇s life. And the control elevator circulate of the PLC system slso has more and more high request，request to attain the movement purpose of “steady，quasi-，quick”of elevator movement.That system mainly from PLC，logic control the electric circuit constitute.In hardware for siemens plc to the control and an exchangs difference to tread electric motor among them，affter the electric appliances，get in touch with a machine ，route of travel switch and press button ，give out light the indicator constitute and PLC I/O turned around the interface for the control system of integral whole ，In the software to design of the modules ， including the floor and the car is outside the call for the floor ，inspection and control of the elevator door ，and the state indicates that control，adding modules ，The whole system passes PLC .logic control the electric is to the rise and fall of elevator ，Add ，decelerate;Even layer; Start，make to move a control .Its struclue is simple and circulate an effciency，even layer accuracy and with good value .promote. Keywords:PLC ;elevator;The logic controls electric circuit 目录 1绪论 1 2电梯控制系统方案设计 2 2.1电梯的构造 2 2.2电梯对控制信号的响应要求及其流程 3 2.2.1电梯对控制信号的响应要求 3 2.2.2电梯的控制流程 3 2.3电梯的控制要求 4 2.3.1电梯位置的确定与显示 4 2.3.2轿厢内的运行命令及门厅的召唤信号 5 2.3.3电梯自动运行时的信号响应 5 2.3.4轿厢的启动与运行 6 2.3.5轿厢的平层与停车 6 2.4