半圆形拉深筋圆角半径及金属流动向对拉深筋阻力的影响.pdfVIP

第 45 卷第5 期 Vo l. 45 No.5 吉林大学学报(工学版) 2015 年 9 月 Journal of Jilin University (Engineering and Technology Edition) Sept. 201 5 半圆形拉深筋圆角半径及金属流动 方向对拉深筋阻力的影响 那景新， 白 霜， 刘海鹏， 闰亚坤 〈吉林大学汽车仿真与控制国家重点实验室，长春 130022) 摘 要:通过实验测试与回归分析相结合的方法，研究了半圆形拉深筋的圆角半径和金属流动 方向对拉深筋阻力的影响。通过专门设计的实验装置，分别测取了以困角半径和金属流动方 向为变量的拉深筋阻力数据，分析得出困角半径对拉深筋阻力的影响呈近似线性关系，金属流 动方向对拉深筋阻力的影响呈近似的抛物线关系。综合两个参数的影响规律，基于 回归分析 方法建立了拉深筋阻力的近似解析模型。最后，通过回归系数的 T 检验得出，金属流动方向 对拉深筋阻力的影响要比圆角半径显著，并且金属流动方向与圆角半径的精合效应较小。 关键词:车辆工程;拉深筋;圆角半径;金属流动方向 ; 拉深筋阻力;回归分析 中图分类号: U463; TG301 文献标志码:A 文章编号: 1671-5497(2015 )05- 1402-06 001 :10. 13229/ j. cnki. jdxbg xb201505004 Effects of drawbead corner radius and metal flow direction 。n drawbead restraining force NA Jing-xin ,BAI Shuang , LIU H ai-peng , YAN Ya-kun (State Key Laboratory of Automotive Dynamic Simulation , ] ilin Unit居rsity ， Changchun 130022 , China) Abstract :The effects of drawbead corner radius and metal flow direction on drawbead rest r ain ing force are studied by experiment test ing and regr ession analysis. Experimental data are acquired respectively bya specially designed experiment device , in which the variable is t h e corner radius or meta l flow dir ection. An approximate linear relat ionship exists between the corner radius and drawbead restraining force , while the relationship between the metal flow direction and drawbead restraining force is nearly parabolic. An approximate analytical model of drawbead restraining force is establish ed based on the influence law and regression analysis. F inally , by T test of regression coefficient , it is concluded