网状被动传感器系统优化设计-深圳大学.pdfVIP

28 12 Vol. 28 No. 12 2006 12 Systems Engineering and Electronics Dec. 2006 : 1001-506X(2006) 12- 1800-0 刘宗香, 黄敬雄, 谢维信, 杨 ( 深圳大学信息工程学院AT R 实验室, 广东 深圳518060) : 结合网状被动传感器系统建设的需要, 提出了网状被动传感器系统优化设 模型, 依据优化设 模 型提出了基于误差方差Cramer- Rao 下界的优化设 算法探讨了优化过程中指标集目标集的确定方法, 最后 通过仿真 算分析了三种配置结构的性能 : 数据融合; 优化设 ; CRLB; 被动传感器 : T N953 : A Optimization design for the netted passive sensor system LIU Zong-xiang, HU ANG Jing-xiong, XIE We-i xin, YANG Xuan (A TR Lab. , Coll1 of Inf ormation and Engineering , S henz hen Univ . , S henz hen518 6 , China ) Abstract: In combination with the needs originated from the construction of the netted passive sensor sys- tem, an optimization design model for the passive sensor system is presented. In accordance with the optimiza- tion design model, an optimization design algorithm based on the Cramer-Rao lower bound ( CRLB) of error va- riance is proposed. T he methods f or determining the index set and the target set in optimization process are dis- cussed. Finally, the perf ormance of three configurations is evaluated through simulation calculation. Key words: data fusion; optimization design; CRLB; passive sensor Pop t = arg min [ maxf (L, Ld ) - f d ] , Pc I P (1) 0 P T I U c : P ) ) ) , P ) ) ) P , c , , Pop t ) ) ) , , , , L ) ) ) , , , , Ld ) ) ) , U ) ) ) ( ,