哈尔滨九洲MC-Modbus-07367.doc

HJZ-MC-Ⅳ型监控装置 HJZ-MC-IV Monitor Equipment 通讯规约（MC-Modbus-07367） Communication Conventions（MC-Modbus-07367） 哈尔滨九洲电气股份有限公司 HARBIN JIUZHOU ELECTRIC CO., LTD. 用户通讯规约 Communication Conventions For Consumer Modbus规约说明 1. Modbus Instruction 在Modbus规约通讯过程中每个字节的格式为：1个开始位，8个数据位，2个停止位。 In the communication course abiding by the Modbus Conventions, each byte’s format is: 1 start-bit, 8 data-bits and 2 stop-bits. 数据的桢结构的格式为：地址域（8位），功能域（8位），数据域（n×8位），CRC校验（16位）。 The frame format of data: address field (8-bit), function field (8-bit), data field (n×8-bit), CRC parity (16-bit). 对于九洲公司的监控装置来说：地址域（即监控的地址）是可以通过监控装置设定的。功能域只识别功能编码03表示读一组寄存器；对于收到其他功能编码时，本监控发出例外情况响应。数据域包括多组数据，传送时，高位字节在前，低位字节在后。主机召唤从机的数据域包括从机寄存器的地址和数量，寄存器的地址是以0为参考的（例如查询地址为1的寄存器数值时，寄存器的地址为0）；从机响应主机的数据域包括返回数据的字节计数和主机所要的数据。当本监控收到的数据地址是不允许时（即从机的寄存器地址是不允许的），将发出例外情况响应；当收到数据域的数值是不允许时（例如从机的寄存器的数量是不允许的），将发出例外情况响应。CRC域包括一个16位的二进制数，占两个字节，在传送时，低位字节在前，高位字节在后。CRC校验码具体生成方式后面已给出C语言程序。 In the monitor equipments produced by Jiuzhou Co., address field (for monitor) can be set through itself. Its function field can only identify function code 03 which stands for reading a group of registers; when it receives other function-codes, the monitor equipment executes exception response. Data field contains groups of data, and low-bit byte goes after high-bit byte. The data field of main machine calling sub-machine contains address information and the number of sub-machine’s registers; the reference point of address is 0 (Namely, the register’s reference address would be 0 if its actual address is 1.); the data field of sub-machine’s response to main machine contains a byte count of returned data and the data demanded by main machine. When the monitor receives unavailable address (namely, the address of sub-machine’s register is unavailable.), the monitor equipment executes exception response; when it receives unavailable value of data field (namely, the number of sub-machine’s registers is unavailable.), the monitor equipment executes exception res