IE应用程序错误解决方法(国外英语资料).docVIP

IE应用程序错误解决方法(国外英语资料) 0X000000 this memory cannot be the solution to read written There are aspects of this phenomenon, one is hardware, that is, memory problems, and the two is software, which there are many problems. One: first about hardware: Generally speaking, computer hardware is not easy to bad. Memory problems are not likely (unless your memory is really a Hodge only to collapse), the main areas are: 1. Memory bad (secondary memory is mostly), 2. Using quality memory, 3. Memory inserted on the motherboard is too dusty in the gold fingers section. 4. The use of different brands, different capacities of memory, resulting in incompatibility. 5. Overclocking brings heat problems. You can use the MemTest software to check memory, which can thoroughly detect the stability of memory. Two, if not, then the software from the troubleshooting. The first principle: the memory has a place called the storage of data buffer, when the program on the data buffer, need to provide the operating system function to apply, if successful memory allocation, memory area function will be the new return to the application, applications can use this memory through this address. This is the dynamic memory allocation, the memory address, that is, cursor in programming. Memory is not always available, endless, and sometimes memory allocation will fail. When the allocation fails, the system function returns a 0 value, when the return value 0 does not represent the newly enabled cursor, but rather a notification issued by the system to the application informing the error. As an application, in the memory after each application should check whether the return value is 0, if it is, it means that there is a fault, some measures should be taken to save, which enhances the robustness of the program . If the application does not check the error, it will continue to use this memory in subsequent execution, in accordance with the idea that the value is the available cursor assigned to it. The real 0