东海矿2(国外英语资料).docVIP

东海矿2(国外英语资料) Report materials to Dragon coal group leader Donghai Coal Mine of Jixi branch Two, 0, June 13th Report materials to Dragon coal group leader Dear Chairman and leaders: First of all, I would like to extend a warm welcome to all the leaders for the inspection and guidance of mine! Below mine on the current safety, production, management and other work to report, inappropriate, please criticize me. I. General Situation of mine Mine was built by the Bureau of reclamation in 1958 and transferred to Jixi Mining Bureau in 1965. The design capacity is 450 thousand tons / year. In 1983, two additional belt inclined shafts were added and five eastern mining areas were opened. The design capacity increased by 900 thousand tons / year. In 1997, the two expansion was completed, and the six mining area was opened. It was put into production at the end of 2000. The design capacity of the mine is 1 million 200 thousand tons / year, and the production approval capacity in 2006 is 1 million 300 thousand tons / year. Mine is located in the East China Sea town of Jidong county. The geographical coordinates of the main shaft are: longitude 131 degrees, 10 00, latitude 45, 21 , 00. 31KM from Jixi city. Ida to 11 km, 3 km tilt, Ida area of 33 square kilometers. Now it has a population of more than 20 thousand and employs 4600 people. Mine has 15 layers of recoverable coal seam, the total thickness of the recoverable coal seam is 15.97 meters, and all the coal seams are locally mined. The main coal seam of mine is 23#, 32#, 34, 34#, 35#, 48# # and 54-2# layer roof sandstone, the local pseudo top is 0.2 meters -0.6 meters thick sandy shale and shale, difficult roof management; the floor is on the floor for the 34# sandstone, mudstone, difficult to mining to take. The hardness of coal is f=1.3-2.3, and the dip angle of coal seam is 120-240. Coal seam occurrence condition and coal quality table coal seam Numbered seam thickness M dip angle, coal seam spacing, roof The lithology o