临界问题 高三物理 第二轮专题复习(国外英语资料).docVIP

临界问题 高三物理 第二轮专题复习(国外英语资料) Critical question, senior physics, second rounds, topic review I. special tips When the object consists of a physical state into another physical state, there may be a transition of the turning point, when the object state is usually called the critical state, the physical conditions associated with it is called critical conditions. The key to solving the critical problem is to find the critical condition. Many critical issues, it used just and maximum, minimum and collision and not out... Etc.... Words of the critical state gives a clear hint, perhaps, we must seize these specific words to explore their containing rules and identify critical conditions. Sometimes, some critical problems in not containing the common critical terms, but I found a physical quantity changes during the change, the physical quantity of mutation objects in which state is a critical state. The critical problem usually has some hidden, problem-solving flexibility, you should be trying to restore the physical exercise situation, seize the characteristics of the critical state, find the correct direction of problem solving. Two, college entrance examination questions over the years 1. (19 points) (05, the national Volume I, 24) as shown in the figure, the quality of the object A by a light spring and the lower ground mass of the object B connected, the spring stiffness coefficient of K, A and B are in the static state. A light rope inextensible light around the pulley, one end connected to the object A, the other end is connected with a hook. At first, each piece of rope is in a straight line, and a section of rope above A is in the vertical direction. Now, the hook rises a mass of the object C and is released from the stationary state, knowing that it just makes the B go away from the ground, but does not continue to rise. If C is replaced by another mass object, D is still released from the initial position by the stationary state. What is the magnitude of the vel