农大测量学(国外英语资料).docVIP

农大测量学(国外英语资料) Surveying (Civil Engineering) - online work _B A single choice question 1. It is () measured with a compass. (5 points) three north directions Magnetic azimuth True azimuth Coordinate azimuth Knowledge point: User answer: magnetic azimuth -------------------------------------------------------------------------------- Two The measurement of the outside of the wire does not include (). (5 points) measurement of the turning angle of wires Select and bury wire points Calculation of the angle closure error of traverse Measurement of side length of wire Knowledge point: User answer: Calculation of traverse angle closure -------------------------------------------------------------------------------- Three Two groups A and B on the same measurement error of observation, respectively: group A: 0, -3, +2, +3, -2, +1, -1; group B: +5, 0, -1, 0, -6, 0, +1; their observation on the quality assessment is (). (5) the first observation of good quality The quality of observation in group B is good The quality of observation is the same between the two groups Cannot evaluate Knowledge point: Answer: the first user observation of good quality -------------------------------------------------------------------------------- Four The topographic map has adjacent contour lines such as 27, 28, 29, 30, 31, 32, 33, 34, 35m and so on, and the curve is (). (5 points) 28 and 33 27 and 32 29 and 34 30 and 35 Knowledge point: User answer: 30, 35 -------------------------------------------------------------------------------- Five Consider a topographic map with a scale of 1 to 2000 and a distance of 1m. Choose a highway from A to B, requiring that the slope be no more than 5%, and that the line passes through the minimum horizontal distance between adjacent contour lines as (). (5 points) 5mm 1mm 10mm 2mm Knowledge point: User answer: 10mm -------------------------------------------------------------------------------- Six Set up a test with angle intersection method, in order to