几何画板 用法(国外英语资料).docVIP

几何画板 用法(国外英语资料) Geometry Sketchpad usage,.Txt two people quarrel, say sorry first, and not admit defeat, and not forgive. He only cares more about the relationship than the other. Generation and function of 1. points Example 1 draw a triangle Draw three points first (hold down the Shift key, draw points continuously), and then draw the triangle using the line segment command in the drawing menu. Note: the maximum benefit of holding down the Shift key is that the three vertices are selected. Example 2 draw a polygon Draw more than one point first (hold down the Shift key, draw points continuously), and then draw the polygon with the line segment command (or press CtrL+L directly) in the drawing menu. Note: it is important to select the order of vertices, and different orders lead to different polygons. 2. line approach The line drawing tool has three line segments, straight lines and rays, which are drawn in the drawing window after selecting. Example 3. Make a courseware to verify the vertical bisector of the three sides of the triangle and intersect at one point (preliminary drawing exercises) 3. the method of drawing circles There are 3 ways to draw a circle Use a circle tool as a circle; make a circle at two points; circle with the center of the circle and radius (in this way, the circle is fixed, and the radius remains the same unless it changes the fixed length) 4. methods of drawing arc There are 3 ways to draw an arc According to a certain order of selected three points and arc (counterclockwise from the starting point to the end point arc); select the circle and the circle of 2 point arc (counterclockwise from the first point to second points between an arc); select three point circle arc method (with 2 similar, but without select the circle, for the end of the back arc, you can hide the original round, visible new arc) 5. fan and bow Similar to the interior of a triangle (three vertices are first selected), the fan and bow contain the face rather than the