双馈电机的基础道理(国外英语资料).docVIP

双馈电机的基本原理(国外英语资料) The basic principle of doubly fed machine Due to the existence of slip, the DFIG can operate at different wind speeds, and its speed can be adjusted accordingly with the wind speed, so that the operation of the wind turbine is always in its best state, and the efficiency of the unit is improved. At the same time, the voltage and frequency of the stator output power can be maintained unchanged, which can not only adjust the power factor of the grid, but also improve the stability of the system. (1) working characteristics of doubly fed machine The structure of double fed motor is similar to the winding induction motor, stator winding by symmetrical three-phase power supply with fixed frequency excitation, which is different in rotor windings of three-phase power supply with adjustable frequency excitation, generally adopts cycloconverter or AC-DC-AC converter for low frequency current. When doubly fed induction motor stator symmetrical three-phase winding is supplied by three-phase power supply with frequency of F1 (f1=p, n1/60), the rotor speed is n = (L-S) N1 (s is slip, and N1 is synchronous speed of fundamental rotation magnetic field in air gap). In order to realize the stable electromechanical energy conversion, the stator magnetic field and rotor magnetic field should be kept relatively static, that is to say, it should be satisfied: Omega r = Omega 1- Omega 2 Of which, Omega R is the rotor angular frequency; Omega 1 is the angular frequency of the rotating magnetic field formed by the stator current; Omega 2 is the angular frequency of the rotating magnetic field formed by the rotor current. As a result, the rotor power supply frequency f2 = s = F1, when the rotor and stator rotating magnetic field are synchronous N1 rotation, the two remain relatively static. Compared with the synchronous motor, doubly fed motor excitation adjustable volume three: one is the same with the synchronous motor excitation current amplitude can be adjusted; two