挖掘机油耗(国外英语资料).docVIP

挖掘机油耗(国外英语资料) Excavator knowledge Construction machinery after leaving the factory, the general provisions of about 60 hours of running in period (some known as walking period), which is the production of factories in accordance with the construction machinery at the early stage of the technical characteristics of the specified. The running in period is the main link to ensure the normal operation of construction machinery, decrease the failure rate and extend the service life of the construction machinery. But at present, some users because of the lack of common knowledge of construction machinery, or due to tight schedule, or want to gain as soon as possible, and ignore the new machine running in period of special skills request. Some users even think, anyway, manufacturers have the warranty period, the machine is broken by the manufacturer is responsible for the maintenance, so the machine in the running period is long time overload, causing the machine to produce the early fault frequently, not only affects the normal use of the machine, shorten the service life of the machine, but also because the machine failure, influence the progress of the project. Therefore, for the use and maintenance of engineering machinery running in period should cause enough attention. I. characteristics of running in period: 1. wear fast? Because of the influence of new machine parts processing, assembly and adjustment, the friction surface is rough, the contact area of the mating surface is small, and the surface pressure is uneven. In the process of running the machine, the parts of the surface of the concave and convex parts of each other fitted friction, grinding down the metal debris, and as an abrasive, continue to participate in friction, but also accelerated the parts with the surface of wear. Therefore, during the running in period, parts and components (especially the mating surfaces) are easy to be worn and the wear rate is fast. At this time, if overload operation, may c