收板机使用说明书.doc

SCUD-66 UNLOADER Operating manual Table of contents A．Specification table ．．．．．．．．．．．．．．Ｐ０３ B．Operating ．．．．．．．．．．．．．．．．．．．Ｐ０４ B-1．Control panel B-2．Pressed key function table B-3．Tower lamp status table B-4．Trouble shooting table B-5．Error code C．Function ．．．．．．．．．．．．．．．．．．．．Ｐ10 C-３．UNLOADER C-８．NO CONVEYOR UNLOADER D．Setup．．．．．．．．．．．．．．．．．．．．．．Ｐ12 D-1．PITCH select Magazine working range setting D-2．Cooling time Parameter setting E．Maintenance．．．．．．．．．．．．．．．．．．．Ｐ14 E-1．Adjustment project E-2．Lubrication project F．Circuitry ．．．．．．．．．．．．．．．．．．．Ｐ15 A．規格表 　 SCUD-66 Model： M L LL XL PCB size (mm) 80*50-330*250 80*50-460*330 80*50-510*380 80*50-510*460 Working height(mm) 900 ± 20 (std.) PCB feed time 6.0 sec Number of feeding pitch 10、20、30、40 mm selectable Power source AC 110 / 220V ± 10V， 1φ50 / 60 Hz Machine dimension(mm) 2000(L) 2610(L) 2680(L) 2680(L) 　 700(W) 840(W) 840(W) 920(W) *Other Spec.on request 1160(H) Machine weight (kg) 150 200 230 250 Electric current capacity 1.6A Air consumption volume 1L / min ．Operating B-1．Control panel B-2．Pressed key function table Function Key Explanation Auto Automatic execution （auto LED＆the tower lamp red candle is bright） Manual Manual type （Manual LED ON） Table rise Causes the table to rise 1 PITCH Table drop Causes the table to drop 1 PITCH Rises the upper limit + Causes the table to upper limit Drops the bottom limit + Causes the table to bottom limit Sends in the Magazine Sent in the Magazine at that time according to the mode execution the movement Sends out the Magazine Sent out the Magazine at that time according to the mode execution the movement Sends in at upper + Enforces send in at upper （No matter at that time mode） Sends out at upper + Enforces send out at upper （No matter at that time mode） Sends in at bottom + Enforces send in at bottom （No matter at that time mode）  Function Key Explanation Sends out at bottom + Enforces send out at bottom （No matter at that