新职业英语 机电英语Unit 6.pptVIP

Task 2 The following things are what Tom usually does for  installing a machine. Arrange them in the order of time and  explain. The rubber feet help minimize the noise and vibration from the motor. Mounting the tool directly to the workbench can cause Vibration of the bench itself, which acts as a “speaker” and actually amplifies the motor noise. Bench mounting also eliminates one of the best features of Sherline machines—the ability to be easily put away for storage. The mill may be mounted in a similar manner on a 10 x 12 to 12 x 24“ prefinished shelf board with rubber feet using the screws to attach the mill to the board. REMEMBER: DO NOT LIFT YOUR MACHINE BY THE MOTOR! Carry the machine by lifting under the base or by the mounting board. To keep your Sherline tools clean, soft plastic dust covers are available. The lathe cover is P/N 4150 for the Model 4000/4100 and 4500/4530 short bed lathes and P/N 4151 for the Model 4400/4410 long bed lathe. A mill dust cover is available as P/N 5150 for 5000-series mills and P/N 5151 for 2000-series 8-direction mills. □ 5. Workbench may act as a “speaker” to talk with the workers. □ 6. The machine can never be lifted by the motor. □ 7. The machine can be secured to the board by some screws. □ 8. The mill can be mounted to a board in a similar way of mounting the lathe. □ 9. The vibration of the workbench may produce great noise in the workshop. □ 10. The plastic covers are used to keep the machine clean. Language Points Translation Jane: Then you may fill in the form 7 from our company’s website, or you may also order those 8 parts from the factory directly by 9 . David: Great! What is the phone number? Jane: Toll free order line 1-800-543-0756. Orders 10 before 12 o’clock will be shipped the same day. David: Thank you.