钢管混凝土受压构件力学特性数值分析研究.pdfVIP

2008 年用户年会论文 钢骨－钢管混凝土受压构件力学特性数值分析研究 陈宇，梁力 （东北大学 资源与土木工程学院，辽宁 沈阳 110004） 摘 要：本文应用 ANSYS 程序，对 3 根不同钢骨率的钢骨－钢管混凝土组合短柱在轴心受压和偏心 受压下的力学性能进行了数值模拟。计算采用分离式模型，考虑了钢材和混凝土材料的非线性本构关系， 分析了不同几何参数对钢骨－钢管混凝土组合柱承载力的影响，并得出了试验值、ANSYS 计算值和理论值 三者之间的相对误差。研究表明，钢骨率和几何参数对承载力有很大影响，轴心受压和偏心受压下材料的 应力发展不同，两者的极限承载力相差较大，轴心受压更能体现钢骨－钢管混凝土组合柱优越的受力性能。 关 键 词：组合结构；钢骨－钢管混凝土柱；力学特性；有限元分析 Study of Mechanical Behavior on Steel Tube Composite Column with Steel Reinforced Concrete by Numerical Method CHEN Yu, LIANG Li (School of Resources Civil Engineering, Northeastern University, Shenyang 110004) Abstract ：Mechanical behavior on axial compression and eccentric compression of Steel Tube Composite Column with Steel Reinforced Concrete (STCC-SRC) with three different types of angle bars in this paper has been mainly studied by software ANSYS. Separate modeling and material nonlinearity constitutive relation of steel and concrete have been considered in the calculation. The impact on STCC-SRC bearing capacity with different geometric parameters has been analyzed and the relative error among test value, calculated value of ANSYS and theoretical value has been given. The study indicates that the steel ratio and the geometric parameter have an evident effect on the bearing capacity. There is a very difference in stress distribution between axial compression and eccentric compression, and also is the ultimate bearing capacity. The study shows that mechanical behavior on axial compression of STCC-SRC is more superior. Key words：composite structure；STCC-SRC；mechanical behavior；finite element analysis 钢骨－钢管混凝土组合柱作为一种新的结构形式，相关研究工作还不够深入，其受力性 能受很多参数的影响，如混凝土强度