六槽移钢机传动系统设计大学论文.docVIP

毕业设计(论文) 六槽移钢机传动系统设计 院 （系）：专 业： 学生姓名： 学 号： 指导教师单位： 姓 名： 职 称： 2015年06月22日 摘 要 本次毕业设计是关于的设计。首先对六槽移钢机作了简单的概述；接着分析了六槽移钢机的选型原则及计算方法；然后根据这些设计准则与计算选型方法按照给定参数要求进行选型设计；接着对所选择的六槽移钢机各主要零部件进行了校核。在的设计、制造以及应用方面,目前我国与国外先进水平相比仍有较大差距,国内在设计制造过程中存在着很多不足。 传动装置Abstract This graduation design is about the design of the six slot steel machine. First of six trough moving steel machine has made the simple outline; then analyzes the six slot steel machine type selection and calculation method of displacement. Then according to these design criteria and selection method in accordance with the given parameters requirements selection of design; then on the selected six tank shift steel machine and the main components were checked. Groove in the shift steel machine design, manufacturing and application, at present our country and the overseas advanced level compared to still have a large gap, in the design and manufacture of domestic six trough steel moving machine process exists many problems. The whole structure mainly by the motor generates dynamics will require the power through the coupling transfer to the gear, through the gear and the transition to another set of gear, and then through the transition gear to worm. At the same time, the paper on the six slot shift steel machine is the key part of the design process are detailed. The main contents include the design of the overall scheme of the system design, motor selection, actuator design, transmission parts, the shaft of the design and check and bearing selection, etc.. This paper mainly introduces the groove shift the development condition of the steel machine, the six slot shift steel structure design principle, six trough shift the overall scheme of steel machine analysis and determination, the six slot shift steel structure design content contained in the mechanical drawing of rendering, the calculation of structure design conclusion and suggestions. Research content of this thesis: (1) the ove