核桃去青皮机构设计【毕业论文+CAD图纸全套】.doc

摘 要 核桃是经济价值很高的油料作物，市场上需求量大，售价高，经济收益好。本文针对新疆维吾尔自治区的核桃种植面积大,收获和处理机械化程度低的实际现状，从核桃青皮、硬壳的物料学特性作为研究的切入点，开展核桃的脱青皮原理与脱青皮装置的技术研究，研制出机械化脱青皮的机械。 本文通过阅览已有核桃去皮机文献提出本次设计方案，该方案设计的机器目标为：生产率600kg/h，去青皮效率。该设计的核桃去皮机主要有 电机张紧轮主轴去皮滚筒上盖粗洗滚筒喷淋水管精洗出料口机架排污口去皮滚筒下盖的去皮拨料板及具有一定螺旋线性的滚筒同时作用下，绕主轴旋转的同时向前进给； （3）去青皮：青皮核桃在进给力作用下依次通过刀片去切削核桃青皮，钢丝刷的摩擦、揉搓来去掉部分未由刀片切削掉的青皮，同时喷洒水管不断滴水由毛刷清洗硬壳核桃表面的粉末，一系列的协助作业，有效的实现青皮核桃的去皮。 由于客观条件的原因，未能对本次设计的核桃去青皮机构进行实物测验，但是本文的研究对今后各类核桃的去皮和去壳的设计与改进都有很好的参考价值。 关键词：核桃去青皮；刀片；钢刷；带传动 ABSTRACT Walnut is one of the oil crops with high economic values,which can be seen in its high demand, price and economic benefits. Given the vast planting area and lower mechanization in the harvesting and processing in Xinjiang Uygur Autonomous Region , the author takes the material characteristics of the walnut green husk and hard shell as the breakthrough point , and carries out the technical study on the principle of green husk peeling and its relevant device, so as to develop a mechanical peeling machine. After reading documents on the walnut peeling machine, the author puts forward the design proposal, aiming at achieving its productivity of 600kg/h and walnut green husk peeling efficiency over 95%. Such mechanical peeling machine mainly involves components as motor, tensioner pulley spindle, feed port, cover the leather roller, coarse washing drum, spray pipe, fine cleaning roller, outlet, frame sewage outfall, peeling drum lower cover. After the detailed design and check of these main components, UG-NX 10.0 is finally applied to modeling, assembling and the motion simulation. The principle of walnut green husk peeling is as follows: （1）Removal of the debris: after the study of the physical performance of walnut with green husk, the separation gap between cylindrical green separation screen grid is set as 10mm, to realize the effective separation of debris, green husks and hard shells. （2）Feeding roller: with the simultaneous action of the stripper plate with the oblique angle of 5% and a spiral