双电压合成矩阵变换器闭环控制的研究.PDFVIP

22 1 Vol. 22 No. 1 J an . 2002 2002 1 Proceedings of t he CSEE n 2002 Chin . Soc. for Elec. Eng . : 0258- 80 13 ( 2002 01- 0074- 06 王 毅, 陈希有, 徐殿国 ( 哈尔滨工业大学电气工程系, 黑龙江哈尔滨 15000 1 RESEARCH ON CLOSED-LOOP CONTROL METHOD FOR MATRIX CONVERTER BASED ON DOUBLE LINE-TO-LINE VOLTAGE SYNTHESIS WA N G Y i, CHEN X-i you , XU Dian- guo ( Department of Electrical Engineering, H arbin Institute of T echnology, Harbin 15000 1, China ABSTRACT: A closed- loop control method for the matrix converter : ; ; ; based on double line- to- line voltage synthesis algorithm is proposed : T M 92 1. 51 : A in this paper. T he errors betw een the actual duty ratios and the real- ism duty ratios of the voltages are calculated through the errors be- 1 tw een the actual output voltages and expected output voltages of the matrix converter. The obtained duty ratio errors are utilized as the ( f eedback to the duty ratios of the next sampling period to realize the , [ 1~ 4] closed- loop control method for the matrix converter. T he basic oper- : ¹ ating principle and realizing method are given in the paper. T he ; º proposed closed- loop control method can make the output voltage , , ; » follow the ref erence voltage very w ell, and it can suppress the w ave- ; ¼, form distortion of the output voltages and input currents . Simulation , A C/ ACAC/ DCDC/ ACDC/ DC r esults prove that the proposed closed- loop control method is valid to , suppress the w aveform distortion of the matrix converter output , voltages and input currents caused by the distortion of sour