变结构控制在阵列式磁集成电压调整模块中的应用研究.pdfVIP

Abstract This article is a DC-DC converter switch comprehensive study. Put forward the integration of the magnetic technology in aspects of electronic components,mainly discussed with the inductor and inductor , transformer and inductor integration, Put forward planar magnetic integration on the basis of the magnetic integrat ion-array magnetic integration,And modeling and simulation for this magnetic integration. The main purp ose of magnetic technology is in order to make the converter switches become shorter, smalerl, lighter, thiner, According to the non-linear features of the switch converter,This paper Put forward variable structure control theory.In the three chapters of thispaper discussed magnetic integration. From the beginning of Chapter IV,discussed the Buck 、Boost as well as Cuk converter with the Variable Structur e Control.In the Cuk convert er of this paper,the two inductor using the array magnetic integration in theory, achiev e structural change control algorithm with TM S320F2812,and simulatedthe circuit with Matlab. The results showed that: variab le structurecontrol algorithm has more advantages than the traditional PWM,mainly in th e fast dynamic response, robust and wide-range of steady-sta te,thesimple control. Keywords :Variable structure control, magnetic integrati on, switching converter, DSP 目录 1 绪论 1 1.1 磁集成技术简介及其国内外发展概况 1 1.2 平面磁集成技术 3 1.3 变结构控制 3 1.4 本文的选题意义和研究内容 4 1.4.1 选题意义 4 1.4.2 研究内容 4 1.5 本章小结 5 2 磁件分析方法 6 2.1 磁件等效电路的建立 6 2.1.1 磁件电路模型的建立方法 6 2.1.3 磁集成对磁件的影响 9 2. 2 电感与电感集成 10 2.3 电感与变压器集成 11 2.3.1 解耦集成 12 2.4 本章小结 14 3 阵列式平面集成磁件原理