喷雾吸收器在扩散吸收式制冷中的理论与试验研究.pdfVIP

Abstract This paper studies the development and research of the diffusion-absorption refrigerator for the promotion of alternative energy and its comprehensive utilization, energy saving and environmental protection in the refrigeration and air-conditioning industry. In this paper we also discuss the characteristics for the adiabatic spray absorbers applied in the diffusion-absorption refrigeration system. We establish mathematical model for the containers in the system and conduct a simulation analysis and calculation program. Meanwhile, we develop the refrigerator and carry out experimental research on it. Applying the spray absorber in the diffusion-absorption refrigerator and conducting a simulation analysis and calculation program, it shows that, under given conditions, the concentration of the ammonia sprayed from the absorber is stronger, the COP of system is smaller, and the temperature of the sprayed solution influences the system performance greatly. It also indicates that if the spray temperature of the absorber is definite, with the increase of the generating temperature or decrease of evaporating temperature, or advance of efficiency for the solution heat exchanger and gas heat exchanger, demanded spray concentration of absorber is higher. Working in different conditions, spray concentration of absorber directly influences the system performance and plays key role in the normal operation. After installing and testing both software and hardware of Labview and programming, we have realized online detection and real-time acquisition on the 26 temperature points, such as heat source temperature, generating temperature, absorption temperature, evaporation temperature, con