CBB82型耐高压金属化聚丙烯电容器.PDFVIP

CBB82型耐高压金属化聚丙烯电容器 第 1 页 共 14 页 4. 适用范围(SCOPE): 适用于MKP82盒装金属化聚丙烯膜内串高压电容器 High Voltage Metallized Polypropylene Film Capacitor Type MKP82 5. 特点(Features): ◎ 能承受高频率和大电流，绝缘电阻高 High insulation level, Withstand considerably high voltage and current ◎ 无感式，金属化内串式结构，损耗极小，内部升温小 Extremely low dissipation factor, small inherent temperature rise, Non-inductive inside-series connection construction ◎ 负电容量温度系数 Negative temperature coefficient of capacitance 6. 用途(Applications): ◎ 用于液晶电视机RCD吸收和谐振电路 Suitable for the situation where applies high frequency and high current pulse ◎用于各种家用电器电源、各种工业变频调速器及变频电源 For various household appliances power, power inverter ◎ 用于电焊机及各种突波吸收电路 For horizontal resonance circuits of monitors and large-screen color TV 7. 技术规范(Technical Specifications): 引用标准 GB/T 14472-98 (IEC 60384-14) Reference standard 气候类别Climatic category 40/105/21 额定温度Rated temperature 85℃ 工作温度范围 -40℃～ +105℃ (从+85℃到+105℃范围，每升高1℃其试验电压 Operating temperature range 降额1.25%) 额定电压Rated voltage 400V ；630V ；1000V 1250V ；1600V ；2000V DC DC DC； DC DC DC 电容量范围Capacitance range 0.001µF ～0.56µF 电容量偏差Cap. tolerance ±3%(H),±5%(J),±10%(K) 损耗角正切值D.F. tgδ≤0.0010 (20℃,10KHz，0.1V) 耐电压Voltage proof 极间耐压：1.6U (5S) (漏电流设定为30mA) R 绝缘电阻I.R. IR≥30000MΩ；测试电压为250V (20℃,1min) DC 第 2 页 共 14 页 CBB82型耐高压金属化聚丙烯电容器 8 深峰产品物料编码规范 T82 2G 103 J 05 :品名代码规定如下：CBB11：Tp1；C