石材验收(国外英语资料).doc

石材验收(国外英语资料) I. acceptance standard of stone Now the family decoration, stone use is more common, generally used as Taiwan panels, land, wall decoration, etc., with wood products and other appropriate collocation, there is a sense of complement each other. Building stone can be divided into natural stone and artificial stone two categories, natural stone are commonly used in granite and marble, slate, sandstone etc.. So, how to test the quality of the stone from the quality and environmental protection? 1. inspection of natural stones Natural stones can be divided into two broad categories according to their composition. One is the main component of marble, calcium oxide, marble surface texture, rich color, beautiful soft, highly decorative, but the disadvantage is low hardness, easy to scratch, poor corrosion resistance, generally used for the decoration of the wall. The other is granite, the main mineral composition is feldspar and quartz, with high surface hardness, wear resistance, weather resistance, corrosion resistance and long service life, but the tone, texture and color are relatively simple. In the ground decoration stone, mainly use granite plate. Cold granite, marble with their natural unique patterns, natural and moist texture to attract people, has been one of the more upscale home decoration ground decorative material. For the finished finished stone, the quality of the stone can be distinguished from the following aspects: (1) check surface finish The surface structure of the stone can also be observed by hand, and the surface smoothness of the stone can be felt by hand. Generally speaking, the finer the mineral particles, the better the firm structure. The stone with uniform fine material structure has fine texture and is the best stone material. The stone with coarse grain and unequal granule structure has poor appearance. (2) to look at the quality of appearance The appearance quality of the stone plate mainly by visual inspection to check, stone