高层建筑外墙装饰面砖防坠落施工方案(国外英语资料).docVIP

高层建筑外墙装饰面砖防坠落施工方案(国外英语资料) Anti falling construction scheme of decorative brick for exterior wall of high rise building Anti falling construction scheme of decorative brick for exterior wall of high rise building 1 Preface Nowadays, an increasing number of high-rise building, the wall decoration, is promoting the use of paint finishes, and will become the future development trend, but the appearance of the construction unit and Design Institute of the city there are many for the pursuit of the appearance of the building, is still used for decorative tile. As part of the construction unit of the base and paving method is wrong, the country has repeatedly appeared on tile even grassroots falling accident, injured pedestrians. According to the construction experience of high-rise buildings in our company for many years, must be in the construction process and paving method. Moreover, in order to ensure tile paving quality, prevent falling accidents, we hereby put forward the following on the wall tile paving construction scheme, available to everyone, perhaps there is a certain reference value. 2 construction technology of exterior wall tile The steps of the process of external wall tile for basic treatment, interface agent, brush, wire, plaster base brick paste, pointing to dip, cleaning, inspection and repair. 2.1 grassroots treatment: (1) the verticality and smoothness of the outer wall shall be up to standard when the structure is in construction. Before hanging rough, will protrude the wall of concrete chisel flat, concave place with 1: 3 cement mortar make up, fill flat, thickness should be layered fill. When the deviation of thickness or squareness exceeds 30mm, technical measures such as nail wire mesh should be adopted. (2) before the brick wall plastering, concrete surface and other basic clean surface dust, dirt and grease, different interface (such as brick and concrete wall junction) to nail bovine wire net width 300mm. (3) the concrete wall should be brus