高层建筑填充墙的裂缝控制的一些问题(国外英语资料).docVIP

高层建筑填充墙的裂缝控制的一些问题(国外英语资料) Key words: concrete; frame structure; high-rise building; infill wall; crack control Abstract: concrete frame structure and shear wall structure are the most commonly used structures in high-rise buildings, but cracks often occur in infill walls, which lead to inconvenience and potential safety hazard. Therefore, analyzing the classification and formation mechanism of high-rise building infill wall cracks, common concern to strengthen the prevention control of high-rise building infill wall cracks has become the project amount, the state administrative departments and housing developers subject. With the development of wall changing and housing commercialization in our country, peoples demands for living environment and building quality are continuously improved, and the control of wall cracks in buildings is more stringent. Therefore, the control of infill wall cracks has become a common concern of the entire construction industry. First, classification and formation mechanism of cracks in infill wall of high-rise building (I) dry shrinkage cracks; There are many forms of dry shrinkage cracks, mainly vertical cracks, horizontal cracks and ladder shaped cracks. The cracks are mostly small cracks. There are dry shrinkage cracks in all kinds of walls. We know that the commonly used lightweight concrete structure blocks as wall materials, reduce the water content of the block with the production characteristics of dry shrinkage deformation, usually block forming within 1 months after the shrinkage deformation is relatively large, then gradually stabilized. After the shrinkage of the block, when the masonry, when the water after the damp and expansion, and then with the masonry drying again shrinkage, masonry internal shrinkage stress, in the weak parts of the pull cracks. The shrinkage deformation caused by this kind of shrinkage is widely distributed, and the cracking is mainly located at the joint between the filled wall and the beam, colum