2012版最新综合解析：九种罕见轴承弊病启事剖析(国外英语资料).doc

2012版最新综合解析：九种常见轴承故障原因分析 It is common for bearings to fail during operation, so there is no need to make a fuss. Failure, judgment and handling are the key. Today we will explain the common faults of FAG bearings. 1, bearing temperature is too high: in the operation of the mechanism, the installation of bearing parts allow a certain temperature, when the use of hand touching the body shell, should not feel hot as normal, and vice versa, indicating that the bearing temperature is too high. The reason of high temperature of bearing lubricating oil quality does not meet the requirements or deterioration, the oil viscosity is too high; tight assembly (insufficient clearance); preloaded bearing; bearing ring rotate on the shaft or shell; overload; rolling bearing retainer or fragmentation. 2, bearing noise: rolling bearings in the work permit a slight noise in the operation, if the noise is too large or abnormal noise or impact sound, it shows that the bearing failure. Rolling bearings cause noise: relatively complex, 1) is the bearing inside and outside the matching surface wear. As a result of this kind of wear, the relation between the bearing and the shell, the bearing and the shaft is destroyed, which leads to the deviation of the axis from the correct position and the abnormal sound generated by the shaft moving at high speed. When the bearing is tired, the surface of the metal is peeled off, and the radial clearance of the bearing is enlarged to produce abnormal sound. 2) lack of bearing lubrication, forming dry friction, and bearing crushing, etc., will produce an abnormal sound. 3) bearing wear loose, the cage loose damage, but also will produce abnormal sound bearing damage. When the rolling bearing is disassembled, the bearings failure and damage can be judged according to the damage situation of the bearing. 3, the raceway surface metal peeling: bearing roller and internal and external raceway surface are subjected to periodic fluctuation load, thus produce