A0502、消失模涂料配制(国外英语资料).doc

A0502、消失模涂料配制 Preparation of A0502 and lost foam coating 1.[200810015774] a production technology of water base paint for EPC A method for producing special water-based coating disappeared, its composition: soil shaped graphite powder, flake graphite, bentonite, carboxymethyl cellulose, emulsion, corn starch, dextrin, BY binder. Composition: soil shaped graphite flake graphite powder 50%, 50% and 5 of bentonite and - 10%, 3 - 5%, carboxymethyl cellulose emulsion 1.5 - 3%, 3 - 5% corn starch, dextrin 3 - 5%, 2 - 3% BY binder. It solves the problem of EPC coatings commonly used easily lead to casting is easy to deformation and cracking and delamination, the surface is not smooth, sticky sand, and sand is difficult to remove, affecting the quality of castings, suitable in casting production using epc. 2.[200610020214] lost foam mold and sand casting water base coating compound powder additive This information discloses casting water-based paint composite powder additive for die and mould, which is composed of eight kinds of raw materials cooked fern potato powder, sodium carboxymethyl cellulose, calcium bentonite, sodium carbonate, sodium chloride, Magnesium Sulfate, medical disinfecting powder, ice powder according to a certain weight percentage of mixing crushed. This kind of compound additives and all foundry refractory filler powder prepared to expect a one-time water-based coating slurry has good performance and use performance, simple preparation process, long period precipitation and fermentation, no air bubbles, smooth, paint prepared by casting sand powder easily, the environmental protection, non-toxic, harmless, low cost, safe and convenient use, storage and transportation. 3.[200510038287] improved water-based coatings for expendable pattern This information is used in the improvement of EPC coating of EPC, especially relates to maintain the original performance of coatings, when casting high permeability of EPC with water-based paint, which is characterize