ansys静力分析笔记(转载)(国外英语资料).doc

ansys静力分析笔记(转载) static analysis Finite element analysis of axisymmetric problems (setting) Select the unit Element Types-, click the Options button, and select -OK. Axisymmetric at the Element behavior Display unit force: Utility MenuSelectEntities... Select the Elements point [Apply], pop-up the Select elements dialog box, and select [Box]. Obtain a three-dimensional stress diagram: Utility, MenuPlotCtrlsStyleSymmetry, Expansion2D, Axi-Symmetric. ! The finite element method of axisymmetric problems can be solved by three-dimensional space element model. The load in axisymmetric model is the total amount of load on 3-D structure. Axisymmetric units: PLANE25, SHELL61, PLANE75, PLANE78, FLUID81, PLANE83 Rod beam problem finite element (setting) The main difference is that the frame is the line, the selection unit is Beam, and the first three are set the real constants. You can choose to open section functions: Utility, MenuPlotCtrlsSize, and, Shape Finite element (set) of plate and shell problems The main difference is that the frame is face; the selection unit - Shell, sets the real constant - the thickness of the input thickness I.J.K.Lnodes. Finite element analysis of structural vibration (setting) Vibration of beam structures: the main difference is that the frame is the line; the selection unit is Beam; the first three are set the real constants. 1. modal analysis settings: Main, MenuSolutionAnalysis, TypeNew, Analysis, set modal analysis. Select Modal. Main MenuSolutionAnalysis Type Analysis Options, select Reduced, OK. pop-up dialog box, enter frequency 0 and 10000, other default, OK. Main MenuSolutionMaster, DOFsProgram, Selected, enter 420 at the main degree of freedom NTOT, that is, 2 times the number of points. OK. 2. harmonic response analysis settings: Main, MenuSolutionAnalysis, TypeNew, Analysis, select Harmonic, OK. Main MenuSolutionLoad, Step, OptsTime/FrequencFreq, and, Substps, enter 0, 100 in HARFRQ, NSUBST, enter 100, KBC, Stepped, OK., 3. resul