AutoCAD技巧精华集合(国外英语资料).doc

AutoCAD技巧精华集合 AutoCAD skills essence collection 1. choosing skills: In the choice of editing, sometimes accidentally choose a primitive, at this point in the command before the end does not need to cancel orders again, simply enter remove in the target prompt, and then at the prompt one by one to choose which alternative primitives (of course, not too much, otherwise difficult to choose!) to fix. In the choice, enter two letters at random, such as Mn, then you will find the command command line appears a large series of hints, including fence, WC, WF, etc., very convenient. 2.AutoCAD tailoring skills As shown in the figure, to the right part of a circle (as other border) outside the line cut, the common way is to choose clipping boundaries and then choose to cut the line, in fact AutoCAD more simple way, the practice is as follows: 1. perform the cropping command by convention, and select clipping boundaries (carriage return confirmation); 2. when prompted to select the line element to be cut, enter f (fence) and enter the confirmation; 3., in the prompt: First Fence point, draw with the line segment to cut the continuous rubber band straight line, enter the confirmation (see icon). There are 2. points to note: 1., the rubber band does not need to be closed in a straight line. 3. choosing skills The user can use the mouse to select a target, choose the target one by one to add to the selection, in addition, AutoCAD also provides Window (the type W in response to the Select object or directly on the screen from right to Zola a rectangular box in response to Select: object, Crossing (tip) to type C object: in response to the Select or directly on the screen from left to right, pull a rectangular box in response to Select object (Cpolygon): tips, to type CP in response to the Select object, Wpolygon (:) to type WP in response to Select object:) etc. as a window to select the target, including Window and Crossing for rectangular window, and Wpolygon and Cpolygon for the