NPN和PNP在电路中具体的感化差别(国外英语资料).doc

NPN和PNP在电路中具体的作用区别 NPN and PNP are mainly current direction and voltage plus or minus, and to say professional is the polarity problem. NPN is the current (IB) controlled by the current of B = E (C). The E has the lowest potential, and when normal amplification is usually the highest C potential, that is, VC VB VE, IC, E PNP is E (B) C current control (IB) E (IC), the highest E potential, and the normal amplification is usually the lowest C potential, that is, VC VB VE In short, VB is usually in the middle, VC and VE on both sides, and this is consistent with the usual BJT symbols in the position, you can use this to help your image, thinking and memory. Moreover, although the poles of BJT are not pure resistors, the voltage direction and the current direction are the same, and the high potential of the current from the low potential will not occur. Now the popular usually have braided bark thistle O Macao scarlet was fold dirty long protect Huan Yu Jie the great ship to long Paul because the book return string just faded strike these fine dry line with plexus plexus Jian long thin D betel PN circuit, E finally received the floor (directly or indirectly). C is finally received a ceiling (directly or indirectly). The PNP circuit is the opposite, and the C is eventually connected to the floor (directly or indirectly), and the E is eventually connected to the ceiling (directly or indirectly). This is also to satisfy the above relationship between VC and VE. In general circuits, with NPN, you can get the version of PNP by up and down symmetrical switching.. Whenever a 6 polarity relationship (4 current directions and 2 voltage inequalities) is satisfied, the BJT circuit may work properly. Of course, to ensure normal work, we must also ensure that these voltage and current meet some further quantitative conditions, that is, the so-called working point conditions. For NPN circuits: The common emitter configuration, can be roughly understood as the VE as a fixed refer