PCB精品技术技巧(国外英语资料).doc

PCB精品技术技巧 1. how do you add libraries in the original Tango (such as TTL.LIB/COMS.LIB, etc.) in Protel99? Add library in Protel99: in its own DDB file (the project file or otherwise specifically for this library built a) into (import) you want to add the.Lib file, the.Ddb file and edit environment in principle figure browse liberary box add/move dialog box in addition have just joined the OK, then you can get added to the library. However, you say the library in tango is in the peotel99 DOS schemetic liberarys.ddb file of Protel, and no need to add it. These methods can be used to add libraries that are provided by themselves or by collaborators 2.GERBER has two formats: RS274D contains XY, DATA, does not contain D-CODE files, customers should be given the appropriate D-CODE file. RS274X containing XY, DATA, and D-CODE are also defined in that file. The D-CODE file (APERTURE LIST) is a ASC II text format that defines the size, shape, and exposure of the D-CODE 3., the Gerber file read into the Protel problem First of all thank you for your Protel99SE, about V2001 Gerber read Protel, I also tried but the converted graph is not complete, I have a suggestion, you can use CAM350 to read V2001 gerber-x format and tangopro format, with PROTEL98 read to see if CAM350 is successful, this function, or using CAM350 to DXF format and then use PROTEL98 to read to see whether it is feasible, in addition to V2001 read format, I have read it, but most of the pads are 2:3 inch and 2:4 inch 3:3 metric is also useful, I crossed the path is to use the DOS version of the pads I set is 3:3 metric, drill set is 2:4 inch. Some are difficult to convert ACAD files to PROTEL you can try the following methods, using the ACAD print function, select Print to file, printer driver HP plotter driver (such as DESIGN JET series, because it can support large drawings), print files generated by CAM350 using the Import command, select HPGL format can be read, read into a DXF file, you can use the PROTE