PLC安装和维护(国外英语资料).doc

PLC安装和维护 Installation and maintenance of [PLC] programmable logic controller Yi Xin Yuan published in 2005-7-5 17:59:50 1 Introduction The programmable controller (PLC) is a new universal automation control device, it will traditional relay control technology, computer technology and communication technology, has strong control function, high reliability, flexible and convenient use, has the advantages of easy to expand more and more widely. But when used in the industrial production site due to poor working environment, interference source is numerous, such as high-power electric equipment starting or stopping caused by voltage fluctuations to form low frequency interference, electric welding machine, EDM machine, motor brush produced by electromagnetic coupling of the power frequency interference, will affect the normal operation of PLC the. Although PLC is a special control device used in the field, in the design and manufacture has been taken a lot of measures, to make it more adapt to the industrial environment, but in order to ensure that the system is stable and reliable, should try to make the PLC have a good working environment, and take the necessary anti-interference measures. 2, PLC should pay attention to problems in installation and maintenance 2.1 PLC installation PLC applies to most industrial sites, but it has certain requirements for the use of occasions, environmental temperature, etc.. Controlling the working environment of PLC can effectively improve its efficiency and life. When installing PLC, avoid the following places: (1) the range of environmental temperature is over 0 ~ 50 centigrade; (2) a relative humidity of more than 85% or condensation of dew (caused by a sudden change in temperature or other factors); (3) direct sunlight; (4) corrosive and flammable gases, such as hydrogen chloride, hydrogen sulfide, etc.; (5) there is a lot of iron dust and dust; (6) frequent or continuous vibration, the vibration frequency is 10 ~ 55Hz, the ampli