ProE出图输出问题的解决(国外英语资料).doc

ProE出图输出问题的解决 Solving the output problem of ProE graph 2009-10-28 11:00:40 Author: anonymous source: Internet browsing times: 152 text size: [great] [in] [small] Here are some tips, how to exclude the map output problem EPS coloring files and pruning: exclusion of EPS file coloring problems if plotters encounter problems in coloring EPS files on the Pro/ENGINEER map, it should check several projects to ensure the plotter can... Here are some hints on how to exclude EPS shading files and prune out graph output problems: The problem of excluding EPS colored files If the plotter has problems with drawing the EPS coloring file for Pro/ENGINEER, several items should be checked to make sure that the plotter can map such files. When printing the EPS output file, verify that the plotter that has encountered the problem has sufficient memory. The error message on the printer usually points out this problem, for example: Memory Error (memory error) or Error: (error): limitcheck OFFENDING COMMAND: (error command:) The best thing to do is to add memory to the printer to cope with the size and conversion of files. For Postscript, you must load the entire drawing file into memory before printing. In the printers memory, the EPS file is usually converted to the native language of the printer. This conversion takes up 3 to four times larger memory size than the original file. If the postscript shader file is created for the HP DesignJet series plotter that has installed the Postscript card, verify that the following settings are selected on the plotter: If the plotter does not map the file, verify that Plotter, Setup, Lang (plotter settings, language) is set to Postscript. If postscript is not available, there is no Postscript card in the plotter. If the plotter maps the file, but with a E or a larger page, verify that the Page Format (page format) is set to the right size of the paper. For example, if the generated postscript file is created as a map of A size, the Page Format (p